Ipv6 Lan Setup - Draytek Vigor2130 Series User Manual

Tunnel ID
4 . 1 2 . 2 I P v 6 L A
4 . 1 2 . 2 I P v 6 L A
This page defines the IPv6 connection types for LAN interface. Possible types contain
DHCPv6 Server and RADVD. Each type requires different parameter settings.
IPv6 Address
IPv6 Link_local Address
Enable Autoconfiguration
Configuration Type
Vigor2130 Series User's Guide
Heartbeat – sends a packet to the PoP (Point of Presence,
serving IPv6 in IPv4 tunnel), then enables the tunnel on the
PoP side.
Each account applied by the user from AICCU service
provider supports 2 or more services for IPv4 to IPv6/IPv6
to IPv4 with different tunnel IDs. Simply type tunnel ID
characters obtained from AICCU service provider for IPv6
connection. For the default setting, simply use the word
"any".
For more details, please refer to
http://www.sixxs.net/tools/aiccu/。
N S e t u p
N S e t u p
Type static IPv6 address for LAN.
It is used for communicating with neighbouring nodes on
the same link. It is defined by the address prefix fe80::/10.
You don't need to setup Link-Local address manually for it
is generated automatically according to your MAC Address.
Check this box to enable the auto-configuration function for
IPv6 connection.
Vigor2130 provides 2 daemons for LAN side IPv6 address
configuration. One is RADVD(stateless) and the other is
DHCPv6 Server (Stateful).
DHCPv6 Server- DHCPv6 Server could assign IPv6
address to PC according to the Start/End IPv6 address
configuration.
193