Draytek Vigor2130 Series User Manual page 73

IP Address
Subnet Mask
Gateway IP Address
Primary DNS Server
Secondary DNS Server
MTU Size
Mode
Ping IP
Clone MAC Address
Vigor2130 Series User's Guide
Type the IP address.
Type the subnet mask.
Type the gateway IP address.
You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS Server.
If your ISP does not provide it, the router will automatically
apply default DNS Server IP address: 198.95.1.1 to this field.
You can specify secondary DNS server IP address here because
your ISP often provides you more than one DNS Server. If your
ISP does not provide it, the router will automatically apply
default secondary DNS Server IP address: 4.2.2.1 to this field.
It means Max Transmit Unit for packet. The default setting will
be specified by the system automatically. Therefore, keep this
field in blank.
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
65