Draytek Vigor2130 Series User Manual page 89

IP Pool Counts
Lease Time
Force DNS manual setting
Primary IP Address
Secondary IP Address
After finishing all the settings here, please click OK to activate them.
Vigor2130 Series User's Guide
your router is 220.135.240.1, the starting IP address must be
220.135.240.2 or greater, but smaller than 220.135.240.254.
Enter the number of IP addresses in the pool. The maximum
is 10. For example, if you type 3 and the 2nd IP address of
your router is 220.135.240.1, the range of IP address by the
DHCP server will be from 220.135.240.2 to 220.135.240.11.
It allows you to set the leased time for the specified PC.
Enable - Force router to use DNS servers in this page
instead of DNS servers given by the Internet Access server
(PPPoE, PPTP, L2TP or DHCP server).
You must specify a DNS server IP address here because your
ISP should provide you with usually more than one DNS
Server. If your ISP does not provide it, the router will
automatically apply default DNS Server IP address:
194.109.6.66 to this field.
You can specify secondary DNS server IP address here
because your ISP often provides you more than one DNS
Server. If your ISP does not provide it, the router will
automatically apply default secondary DNS Server IP
address: 194.98.0.1 to this field.
The default DNS Server IP address can be found via Online
Status.
If both the Primary IP and Secondary IP Address fields are
left empty, the router will assign its own IP address to local
users as a DNS proxy server and maintain a DNS cache.
If the IP address of a domain name is already in the DNS
cache, the router will resolve the domain name immediately.
Otherwise, the router forwards the DNS query packet to the
external DNS server by establishing a WAN (e.g.
DSL/Cable) connection.
81