Draytek Vigor2130 Series User Manual page 74

After finishing all the settings here, please click OK to activate them.
D H C P
D H C P
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
your router automatically. It is not necessary for you to assign any setting,
Router Name
Domain Name
MTU Size
Mode
Ping IP
Clone MAC Address
After finishing all the settings here, please click OK to activate them.
Type in a name for the router. It must be the same as the name
used in Syslog.
Type the domain name (e.g., draytek) to fit the request of some
ISPs.
It means Max Transmit Unit for packet. The default setting will
be specified by the system automatically. Therefore, keep this
field in blank.
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
Detect or Ping Detect for the system to execute for WAN
detection.
If you choose Ping Detect as detection mode, you have to type
IP address in this field for pinging.
It is available when the box of Enable is checked. Click Clone
MAC Address. The result will be displayed in the field of
MAC Address.
66
Vigor2130 Series User's Guide