Yamaha 2010 FX Nytro FX10X Service Manual page 714

SPEC
CABLE ROUTING
DC back buzzer lead
Wire harness
Fuel tank installation, Wire har-
ness routing direction
Location of the wire harness
before installing the fuel tank
Fuel tank installation
Location of the wire harness
after installing the fuel tank
Plastic band
Frame rear cross member
Temporally put the wire harness
at the front of the surface shown
in the illustration.
Press the wire harness with the
bearing holder.
Detailed instruction of starter
motor lead routing
Starter motor assembly
Starter motor lead
To the starter relay
Oil hose
The starter motor lead should
be within the area indicated by
the arrow shown in the illustra-
tion.
Oil filter
Route the starter motor lead
above the oil hose.
164