Installation - Yamaha 2010 FX Nytro FX10X Service Manual

CRANKCASE

INSTALLATION

1. Lubricate:
• Crankshaft journal bearings
(with the recommended lubricant)
Recommended lubricant:
Engine oil
2. Apply:
• Sealant
(onto the crankcase mating surfaces)
Yamaha bond No. 1215:
(Three Bond No.1215
90890-85505
TIP
Do not allow any sealant to come into contact
with the oil gallery or crankshaft journal bear-
ings. Do not apply sealant to within 2 ~ 3 mm
(0.08 ~ 0.12 in) of the crankshaft journal bear-
ings.
3. Install:
• Lower crankcase
(onto the upper crankcase)
106
ENG
®
)