Yamaha 2010 FX Nytro FX10X Service Manual page 494

Model
Throttle:
Throttle cable free play
Engine idle speed
Oil filter:
Oil filter type
Bypass valve opening pressure
Oil pump:
Oil pump type
Inner-rotor-to-outer-rotor-tip clearance 0.090 ~ 0.150 mm (0.0035 ~ 0.0059 in)
Outer-rotor-to-oil-pump-housing
clearance
Relief valve operating pressure
Oil pressure (hot)
Cooling system:
Radiator cap opening pressure
Thermostat opening temperature
Valve lift
Water pump type
Antifreeze type
Coolant mixing ratio
(antifreeze: water)
Capacity
Max. impeller shaft tilt
MAINTENANCE SPECIFICATIONS
FX10Y/FX10RTRY/FX10RTRSY/FX10XTY/FX10MTRY
3.0 ~ 4.0 mm (0.12 ~ 0.16 in)
1,450 ~ 1,550 r/min
Cartridge (paper)
78 ~ 118 kPa (0.78 ~ 1.18 kg/cm
Trochoidal
0.030 ~ 0.080 mm (0.0012 ~ 0.0032 in)
440 ~ 560 kPa (4.40 ~ 5.60 kg/cm
50.0 kPa (0.50 kg/cm
107.9 ~ 137.3 kPa (1.08 ~ 1.37 kg/cm
69.0 ~ 73.0 °C (156.2 ~ 163.4 °F)
8.0 mm/85.0 °C (0.31 in/185.0 °F)
Single-suction centrifugal pump (Impeller type)
High-quality ethylene glycol antifreeze containing
corrosion inhibitors
3 : 2 (60% : 40%)
3.40 L (2.99 Imp.qt, 3.59 US qt) (FX10Y/FX10RTRY/
FX10RTRSY/FX10XTY)
4.70 L (4.14 Imp.qt, 4.97 US qt) (FX10MTRY)
0.15 mm (0.0059 in)
78
SPEC
2
, 11.1 ~ 16.8 psi)
2
, 63.8 ~ 81.2 psi)
2
, 7.3 psi) at 1,400 r/min
2
, 15.3 ~ 19.5 psi)