Yamaha 2010 FX Nytro FX10X Service Manual page 593

STEERING
NOTICE
First, tighten the bolts on the front side of
the handlebar holder, and then on the rear
side.
Handlebar holder bolt:
23 Nm (2.3 m•kgf, 17 ft•lbf)
8. Install:
For FX10Z/FX10RTRZ/FX10RTRSZ/
FX10XTZ
• Wind deflector bracket holder
• Wind deflector bracket
TIP
Align the end of the wind deflector bracket with
the punch mark
Wind deflector bracket holder
bolt:
4 Nm (0.4 m•kgf, 2.9 ft•lbf)
9. Install:
For FX10Z/FX10RTRZ/FX10RTRSZ/
FX10XTZ
• Handlebar protector
TIP
Install the handlebar cover
to pinch the cables, leads, etc.
10.Adjust:
• Throttle cable free play
Refer to "THROTTLE CABLE FREE PLAY
ADJUSTMENT" in CHAPTER 2.
43
CHAS
on the handlebar.
, making sure not