Yamaha 2010 FX Nytro FX10X Service Manual page 720

Fasten the tail/brake light lead
with the holder.
Tail/brake light lead
After routing the tail/brake light
lead, bend the holder around
the lead to fasten it.
Fasten the tail/brake light lead
with the holder. (FX10Z/
FX10RTRZ/FX10RTRSZ)
Pass the tail/brake light through
the harness cover. (FX10XTZ/
FX10M53Z/FX10M53SZ/
FX10M62SZ)
Pass the tail/brake light lead
through the notch in the tail/
brake light bracket.
Tail/brake light
For FX10XTZ/FX10M53Z/
FX10M53SZ/FX10M62SZ
Tail/brake light sub-wire har-
ness
Insert the clamp of the tail/
brake light sub-wire harness
coupler into the hole of the
frame.
CABLE ROUTING
170
SPEC