Crankcase - Yamaha 2010 FX Nytro FX10X Service Manual

CRANKCASE

Order Job name/Part name
Crankcase separate
Engine assembly
Cylinder head
AC magneto rotor/Starter clutch gear
Oil pump
Water pump
Starter motor
1 Engine mounting bracket
2 Oil pump drive chain guide
3 Timing chain guide (exhaust side)
4 Timing chain guide (intake side)
5 Oil pump drive chain
6 Timing chain
7 Crankshaft position sensor
CRANKCASE
10 Nm (1.0 m•kgf, 7.2 ft•lbf)
12 Nm (1.2 m•kgf, 8.7 ft•lbf)
24 Nm (2.4 m•kgf, 17 ft•lbf)
25 Nm (2.5 m•kgf, 18 ft•lbf)
1st
2nd
Final
1st
2nd
Final
Q'ty
Remove the parts in the order listed below.
Refer to "ENGINE ASSEMBLY".
Refer to "CYLINDER HEAD".
Refer to "AC MAGNETO ROTOR AND
STARTER CLUTCH".
Refer to "OIL PAN AND OIL PUMP".
Refer to "WATER PUMP" in CHAPTER 6.
Refer to "STARTER MOTOR" in
CHAPTER 8.
2
1
1
1
1
1
1
102
ENG
15 Nm (1.5 m•kgf, 11 ft•lbf)
15 Nm (1.5 m•kgf, 11 ft•lbf)
Specified angle 65 ~ 70°
15 Nm (1.5 m•kgf, 11 ft•lbf)
15 Nm (1.5 m•kgf, 11 ft•lbf)
Specified angle 85 ~ 90°
Yamaha bond No.1215
®
(Three Bond No.1215 )
Remarks