STEERING
Tie rod end locknut:
25 Nm (2.5 m•kgf, 18 ft•lbf)
LOCTITE
Tie rod and pivot arm nut:
35 Nm (3.5 m•kgf, 25 ft•lbf)
Tie rod and steering knuckle nut:
28 Nm (2.8 m•kgf, 20 ft•lbf)
3. Install:
• Steering shaft
• Locknuts
• Joints
Steering shaft
part number
8GL-23821-00
NOTICE
Always use new cotter pin.
Steering shaft and pivot arm nut:
35 Nm (3.5 m•kgf, 25 ft•lbf)
Steering shaft and steering
column nut:
35 Nm (3.5 m•kgf, 25 ft•lbf)
4. Bend the lock washer tab along a flat side
of the bolt.
40
CHAS
®
Set
Shaft
length
length
232.2 mm
174.0 mm
(9.14 in)
(6.85 in)