Yamaha 2010 FX Nytro FX10X Service Manual page 606

DRIVE CHAIN
2. Install:
• Shift rod
3. Adjust:
• Shift rod length
Adjustment steps:
• Move the shift lever to the "FWD." position.
• Loosen the locknuts
• Turn the shift rod
is 0 mm (in direction where
ened appropriately) and then turn back the
shift rod 1/2 turns.
• Tighten the locknuts.
Shift rod end locknut:
7 Nm (0.7 m•kgf, 5.1 ft•lbf)
4. Fill:
• Drive chain oil
Refer to "DRIVE CHAIN" in CHAPTER 2.
5. Adjust:
• Drive chain slack
Refer to "DRIVE CHAIN" in CHAPTER 2.
56
POWR
TR
.
so that shift rod free play
can be length-