Removal - Yamaha 2010 FX Nytro FX10X Service Manual

Hide thumbs Also See for 2010 FX Nytro FX10X:

Table of Contents

REMOVAL

• Crankcase bolts

• Place the engine upside down.

• Loosen the bolts in decreasing numerical

order of the embossed numbers on the crank-

• Loosen each bolt 1/4 of a turn at a time. After

all of the bolts are fully loosened, remove

• Lower crankcase

Tap on one side of the crankcase with a

softface hammer. Tap only on reinforced

portions of the crankcase, not on the

crankcase mating surfaces. Work slowly

and carefully and make sure that the crank-

case halves separate evenly.