DRIVE CHAIN
INSTALLATION
1. During installation, pay attention to the fol-
lowing.
Properly install the rubber seal onto the drive
chain cover, making sure that there are no gaps.
Be sure to install the collars in their origi-
nal positions, otherwise the brake disc
and secondary shaft will stick.
0.2 ~ 0.7 mm (0.008 ~ 0.028 in)
Install the circlip with the punch mark facing out-
side of the snowmobile.
: ESSO beacon 325 grease or Aeroshell
grease #7A
For the secondary shaft and drive chain cover
installation, refer to "SECONDARY SHAFT".
55
POWR
TR