MUTOH SC-550 Maintenance Manual page 41

2) X-Y Move.
* Diagnost – 5 *
TIME
XY-move
* XY MOVE *
F3 Shift
* Aging *
F3 X
Press F3
* Paper shift *
F3 Start
Press F4
* Quality *
F1 Blocks
F3 Dashline
Before you press (F3) 'START', you have to position the pen to the desired place on the paper by
using the jog keys.
Press (F1) to activate the ZIG ZAG test.
Press (F2) to activate the 45° test.
Press (F3) to activate the Dash line test.
Press (F4) to activate the Circles test.
3) General (Backup plots).
* Diagnost – 5 *
F1 TIME
F3 XY-move
* Total Plot *
F3 Backup
DISTANCE
General
Press F3
Aging F2
Quality F4
Press F2
With this test you can make the plotter
XY F2 continuously moving in the X-/Y- axis or
Y F4 both axes together and the time of operation
is displayed
For this test a SHEET of paper need to be
loaded. This test checks the if the tracking
Finish F4 of the media remains correct during
operation
For this test a SHEET of paper and a pen
Line45 F2 need to be loaded.
Circle F4 This test is used to check the overall plot
quality of the machine
DISTANCE F2
General F4
Press F4
Adjust F4
Maintenance Manual – SC Cutting Plotter
This plot requires Min A3 size paper and a pen.
(F3) 'Backup' plots the USER parameters.
(F4) 'Adjust' plots the adjustment values.
41 AP-74030, Rev / B