Dip Switch Settings On Main Pc Board - MUTOH SC-550 Maintenance Manual

6.3.3. Dip switch settings on Main PC board.

MODEL
SC-550
SC-650
SC-750
SC-1000
SC-1300
Warning :
The main PC board for SC-550 looks similar to the other ones, but can not be used in
other SC-series. (and vice versa)
The boards are labelled were they not can be used.
Warning :
After Main PC board replacement put the EEPROM (U3) from the initial board in the new
one. In this way no other adjustments or user parameters have to be reinstalled.
If for one or other reason the EEPROM (U3) need to be replaced, the following data
must be checked and if necessary readjusted. (Please refer to 3.1.1. RS-232C Pin
configuration.)
POS 8 7
OFF * *
ON
OFF * *
ON
OFF * *
ON
OFF *
ON *
OFF *
ON *
Maintenance Manual – SC Cutting Plotter
6 5 4 3
* * * *
* * * *
* * *
*
* * * *
* * *
*
62
2 1
* *
* *
* *
* *
* *
AP-74030, Rev / B