MUTOH SC-550 Maintenance Manual page 44

Pen Force : 40 g
F2 change : DOWN
Press ENTER to
Input value
* Pen Force Input *
F1 1g ® 40g
F3
Pen Force
F2 change : DOWN
Press ENTER to
Input value
Pen Force Input
F1 1g ® 450g
F3
Confirm Input
40 ® 40 , 450 ® 450
2) Pen force Verify.
* Pen Force *
F3 Adjustment
Put Pen in the
Head Close cover
and press ENTER
Pen Force :
F1 10g
F3 DOWN / UP
F2
Press F2 (DOWN)
Press ENTER
F2
F4
Press ENTER
: 450g
F2
Press F2down
Press ENTER
F2
F4
Press ENTER
Press Enter
Plot F2
Check F4
Press F4
Press ENTER
: DOWN F2
F4
Maintenance Manual – SC Cutting Plotter
(F2) toggles pen UP/DOWN.
Attach bar tension gauge of 50g to pen and read the value
when the pen tip lifts from the paper.
F1/F3 changes the digit
F2/F4 changes the value.
Enter the measured value
(F2) toggles pen UP/DOWN
Attach a bar tension gauge of 500 g to pen and read the
value when the pen tip lifts from the paper.
F1/F3 changes the digit
F2/F4 changes the value.
Enter the measured value
Press ENTER
Press ENTER
(F2) Plot is of no importance
(F4) to verify the pen force calibration.
Put adjustment pen JD-41440 in penhead.
With F1/F3 you can select different pen forces.
With F4 you can toggle UP/DOWN.
Attach a bar tension gauge to the pen and verify the value.
Press EXIT, Press ENTER.
44 AP-74030, Rev / B