MUTOH SC-550 Maintenance Manual page 3

COPYRIGHT © 2001 Mutoh Europe N.V. all rights reserved.
This document may not be reproduced by means, in whole or in part, without written permission of the
copyright owner.
This document is furnished to support the Mutoh SC-series cutting plotter. In consideration of the furnishing
of the information contained in this document, the party to whom it is given assumes its custody and control
and agrees to the following :
1) The information herein contained is given in confidence, and any part thereof shall not be copied or
reproduced without written consent of Mutoh Europe N.V.
2) This document or the contents herein under no circumstances, shall be used in the manufacture or
reproduction of the article shown and delivery of this document shall not constitute any right or license to
do so.
This equipment complies with the requirements for a class A computing device in the FCC rules, part 15,
subpart J.
Operation of this device in a residential area may interfere with television or operating utilities.
Cutters generate weak radio signals and may interfere with television reception and utilities. If the cutter
does interfere with radio or TV reception, try the following :
·
Change the direction of your radio and TV reception antenna or feeder.
·
Change the direction of the cutter.
·
Move either the cutter or the receiving antenna so that there is more distance between them.
·
Be sure the cutter and the receiving antenna are on separate power lines.
.
COPYRIGHT NOTICE
FCC WARNING
3 AP-74030, Rev / B