Diagnost. 6 - MUTOH SC-550 Maintenance Manual

5.3.4. Diagnost. 4
1) Toolset
* Diagnost-4 *
F1 TOOLSET
* Select TOOL *
F3 <
Press ENTER/EXIT
This diagnostic allows you to change from tool to pen or the reserve by pressing F3/F4.
2) Paper.
This test / adjustment is of no importance.
5.3.5. Diagnost. 5
1) Time and Distance.
* Diagnost – 5 *
F1 TIME
F3 XY-move
(F1) TIME displays the actual working time of the machine.
(F2) DISTANCE displays the actual distance that the machine has been cut.
Paper F2
Press F1
Pen1 > F4
DISTANCE F2
General F4
Maintenance Manual – SC Cutting Plotter
40 AP-74030, Rev / B