Schedule Day/Night System Mode - For Days Of Week - Panasonic DBS 576 Technical Manual

Section 700 - Operation
7. Enter the Message Key ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or existing data, press the FLASH key.
8. Press the HOLD key to store the entry.
9. To set additional Message Key ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
10. Repeat steps 7-9 until all Message Key ID codes are set.
11. Press the AUTO key to exit the entry mode.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
Schedule Day/Night System Mode - for Days of Week
Description
For the DBS 576 system to automatically switch between Day/Night System Modes (Day 1, Day 2, or
Night), you must define a schedule. This topic describes how to define three schedule patterns based
on the day of the week and the time when the switch should occur:
Pattern 1
- Weekdays (Monday-Friday),
Pattern 3
- Weekend "B" Sunday. Four mode change options are available: Day 1, Day 2, Night, or
None (no switch).
In Automatic Day/Night Mode, the System identifies the day of the week (example: Monday), and
then applies the appropriate schedule pattern to that day, unless that day has been identified as a
Special Day of the Month, a Holiday, or an Extended Holiday.
To define Special Days of the Month, in which you assign one of the three schedule patterns to a day
of the month, see "Schedule Special Days of the Month" on page 4-16. To schedule holidays, see
"Schedule Day/Night System Mode - for Holidays" on page 4-18. To schedule extended holidays,
"Schedule Night System Mode - for Extended Holidays" on page 4-23.
576-51-700
Action
Pattern 2
DBS 576 (USA) issued April 2002
Chapter 4. User Maintenance
Next extension number displays
Desired extension number displays
MSGID - EXT Number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
- Weekend "A" (Saturday), and
Result
4-13