Schedule Day/Night System Mode - For Holidays - Panasonic DBS 576 Technical Manual

Chapter 4. User Maintenance

Schedule Day/Night System Mode - for Holidays

Description
For the DBS 576 system to automatically switch between Day/Night System Modes (Day 1, Day 2, or
Night), you must define a schedule. This topic describes how to set a schedule based on the date of the
holiday and the time when the switch should occur.
You can specify up to 20
Day/Night System Mode for up to five different time
To define schedules for days of the week, see "Schedule Day/Night System Mode - for Days of
Week" on page 4-13. To choose Night mode for extended holidays, see "Schedule Night System
Mode - for Extended Holidays" on page 4-23.
For a description of Day/Night System Mode, see page 3-24. For more information about
Day/Night System Mode, see
Operation
To schedule Day/Night Modes for
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the date by month (two characters) and day (two char-
acters) for the Special Day 1.
Note: To clear an entry or existing data, press the FLASH
key.
8. Press the HOLD key.
9. Enter the start time in hours (two characters) and minutes
(two characters) for mode 1.
Note: To clear an entry or existing data, press the FLASH
key.
10. Press the HOLD key.
4-18
single-day holidays for the System. For each holiday, you can specify
page 3-26.
Holidays:
Action
DBS 576 (USA) issued April 2002
periods.
81-
User MAINT displays
8107-
System Mode displays
1-
Mode Special Day displays
1000 :MMDD
Special Day 01 displays
1001 :HHMM
S Day 01-1 Start displays
1002 :
S Day 01-1 Mode displays
Section 700 - Operation
the
Automatic
Result
576-51-700