Meet-Me Answer; Reset Call - Panasonic DBS 576 Technical Manual

Section 700 - Operation
4. Make your announcement.
5. Replace the handset.

Meet-Me Answer

To answer a page using Meet-Me Answer:
1. Lift the handset.
2. Enter the Meet Me Answer code (default = ##).
Hardware Requirements
• External relays, amplifier, and speakers are required for external paging.
Related Programming
• FF1-0-02: Paging Override
• FF1-0-03: Extension COS (Paging)
• FF1-0-04: Trunk COS (Paging)
• FF1-2: Dial Plan
• FF2: Trunk COS
• FF3: Extension COS
Considerations
• If an external paging system has been connected, pages can be made to Paging groups 0-9
through the external speakers. Voice paging can also be heard over the extensions in groups 0-9.
• An extension can belong to more than one paging group.
• Only one page may be performed at a time. If you attempt to make a page while another
extension is paging, you will receive a busy signal unless your system allows Paging Override.
• Beginning with Version 3.5 and higher, the paging system can be set to "timeout" if a page
remains unanswered for a specified length of time (0 to 255 seconds). If this feature is set and the
timeout period has elapsed, the page originator's handset will emit a Fast Busy Tone.

Reset Call

Description
If you dial a busy extension, the System allows you to quickly dial another extension by simply
pressing the last digit of the new extension number.
Operation
576-51-700
Action
Action
DBS 576 (USA) issued April 2002
Chapter 7. SLT Features
Result
Result
Intercom dial tone
Connected to specified party
7-33