System Hold; Floating Hold - Panasonic DBS 576 Technical Manual

Section 700 - Operation
•

System Hold

•

Floating Hold

• Exclusive Hold
• Broker's Hold
• Call Park (Station)

System Hold

You can place either an outside or intercom call on System Hold. You can retrieve a call placed on
System Hold from any extension that has a line appearance for the held call.
Operation
To place a call on System Hold:
1. While on a call, press the HOLD key.
To retrieve a call placed on System Hold:
1. Press the HOLD key.
To retrieve a held call on a specific trunk:
1. Lift the handset or press the ON/OFF key.
2. Enter the Specified Trunk Answer code (default = *0).
3. Enter the trunk number.
Hardware Requirements
• N/A
Related Programming
• FF1-0-01: Floating Hold by HOLD Key
• FF1-0-03: Extension COS (Hold Key Operation)
• FF3: Extension COS
Considerations
• N/A

Floating Hold

Floating Hold is a type of System Hold that allows you to retrieve a held call from any extension by
dialing the Floating Hold orbit number for the held call.
576-51-700
Action
Action
Action
DBS 576 (USA) issued April 2002
Chapter 6. DSLT Features
Result
Intercom dial tone
Result
Intercom dial tone
Result
Intercom dial tone
6-17