Panasonic DBS 576 Technical Manual page 211

Section 700 - Operation
SSD Names:
To set SSD names using a large-display or small-display phone:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 1 for the SSD Name Assignment mode.
5. Enter the speed dial bin number (00-79 or 000-799).
6. Press the HOLD key.
7. Press the FLASH key to clear the current data.
8. Enter the speed dial name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
5-85.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 5-87.)
9. Use the bottom row of FF keys to select a single letter.
• See "Example 1. Large-display phone" on page 5-85.
• See "Example 2. Small-display phone" on page 5-87.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
10. Repeat steps 8-9 as many times as necessary to enter the
desired SSD name.
Note: Press the FLASH key to clear the entire entry.
11. Press the HOLD key when finished.
12. To enter another speed dial name, press the CONF key
and repeat steps 5-11.
Example 1. Large-display phone
To enter D:
a. Press the first soft key on the top left.
576-51-700
Action
DBS 576 (USA) issued April 2002
Chapter 5. Key Telephone Features
Result
SSD NO.=>
SSD NAME displays
-SSDXXX
A B C D E F XXX displays (where XXX
= specified SSD bin number)
A B C D E F XXX displays (where XXX
= specified SSD bin number)
Next SSD bin number displays
SSD NO.=>
SSD NAME displays
5-85