Panasonic DBS 576 Technical Manual page 122

Chapter 4. User Maintenance
Operation
To set SSD numbers:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 02.
3. Press the HOLD key.
4. Press the HOLD key.
5. Press the HOLD key.
6. Enter the SSD bin number (00-79 or 000-799).
7. Press the HOLD key.
8. Enter the SSD digits to be dialed.
Note: Press the FLASH key to clear an entry or any exist-
ing data.
9. Press the HOLD key to store the entry.
10. To set additional SSD numbers, press the volume up or
down key or press the HOLD key to move to the desired
SSD.
11. Repeat steps 8-10 until all SSDs are entered.
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
4-38
Action
DBS 576 (USA) issued April 2002
Section 700 - Operation
Result
81-
User MAINT displays
8102-
SSD Assignment displays
0 :
SSD Number displays
Enter SSD # displays
-SSDXXX XXX displays (where
XXX = SSD bin number)
Next SSD bin number displays
Desired SSD bin number displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
576-51-700