Trunk Access; Direct Trunk Access; Mco Trunk Access - Panasonic DBS 576 Technical Manual
Supports version 5.1, section 700 feature operation
Hide thumbs
Also See for DBS 576:
- Technical manual (770 pages) ,
- User manual (102 pages) ,
- Quick reference (4 pages)
Table of Contents
Advertisement
Section 700 - Operation
Trunk Access
Description
The System supports the following ways to seize an idle trunk to make an outside call:
•
Direct Trunk Access
•
MCO Trunk Access
Direct Trunk Access
Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access
to test trunks or to access data trunks.
Operation
To use Direct Trunk Access:
1. Lift the handset or press the ON/OFF key.
2. Enter the Direct Trunk Access code (default = 88).
3. Enter the desired trunk number.
4. Dial the phone number.
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-03: Extension COS (Direct Trunk Access)
•
FF3: Extension COS
Considerations
•
N/A
MCO Trunk Access
The System supports up to 5 MCO groups for each MCO tenant group. You can seize an idle trunk
from the MCO trunk group by entering the MCO access code.
Operation
To seize an idle trunk:
1. Lift the handset or press the ON/OFF key.
576-51-700
Action
Action
DBS 576 (USA) issued April 2002
Chapter 6. DSLT Features
Result
Outside dial tone
Result
Intercom dial tone
6-51
Advertisement
Table of Contents
