Handsfree Operation - Panasonic DBS 576 Technical Manual

Section 700 - Operation
The System must be programmed for Voice Calling for you to use this feature. You must press 1
during a call to switch from Tone Calling to Voice Calling.
Operation
To answer calls using Handsfree Answerback:
1. When the intercom call arrives, confirm that the MUTE
LED is off.
(If it is lit, press the MUTE key to turn it off.)
2. Speak into the microphone to answer.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Intercom Calling Type)
• FF1-0-03: Extension COS (Voice Call Send)
• FF1-0-03: Extension COS (Voice Call Receive)
• FF3: Extension COS
Considerations
• Handsfree Answerback can be used to respond to only voice calls from other extensions - not
tone calls.
• Both the called and calling parties must belong to an Extension Class of Service (COS) that
allows Voice Calling.

Handsfree Operation

Description
Handsfree Operation allows you to use all available System features without lifting the handset. Any
speakerphone can be operated handsfree.
Operation
576-51-700
Action
DBS 576 (USA) issued April 2002
Chapter 5. Key Telephone Features
Result
5-53