Panasonic DBS 576 Technical Manual page 216

Chapter 5. Key Telephone Features
To change the Walking TRS/Station Lockout security code:
1. Lift the handset or press the ON/OFF key.
2. Enter the Station Lockout security code change code
(default = 749).
3. Enter the current Walking TRS/Station Lockout security
code.
4. Enter the new Walking TRS/Station Lockout security code.
5. Replace the handset or press the ON/OFF key.
Related Programming
• FF1-0-03: Extension COS (Station Lockout Enable/Disable)
• FF1-0-03: Extension COS (Station Lockout for another Extension Enable/Disable)
• FF1-2-02: Feature Codes (Station Lockout Code)
• FF1-2-02: Feature Codes (Station Lockout other Extensions Code)
• FF1-2-02: Feature Codes (Station Lockout Cancel other Extensions Code)
• FF1-2-02: Feature Codes (Walking TRS/Station Lockout Security Code Changing Code)
• FF1-0-19: TRS Class Under Station Lockout
• FF8-1-08: Walking TRS/Station Lockout Security Code
Considerations
• Walking TRS and Station Lockout use the same security code.
• You cannot override station lockout using Walking TRS feature.
• If you enter an incorrect key code and then try to dial, the phone will issue a busy tone.
• If station lockout is set, the phone is limited to the Station Lockout TRS Class outside calling
abilities. This TRS Class should be carefully selected to only allow the desired call types.
• Without Walking TRS/Station Lockout Security Code, you cannot set the Station Lockout
feature.
5-90
Action
DBS 576 (USA) issued April 2002
Section 700 - Operation
Result
Intercom dial tone
Enter Old ID displays
Enter New ID displays
Stored ID Code displays
The telephone display returns to the nor-
mal display.
576-51-700