Example Trs Configuration - Panasonic DBS 576 Technical Manual

If the analyze digits table is referenced by a Prefix ID, the system will consider at all entries with the Prefix ID
and analyze any additional digits dialed. The system will look for the longest exact match. If there is an exact
match, the system compares the entered TRS Restriction value to the call originator's assigned TRS level. If the
Restriction value is equal to or greater than the originator's TRS level, the call is denied. Otherwise, the call is
allowed to proceed.

Example TRS Configuration

As an example of setting up TRS, assume that XYZ Department Store is using the DBS 576 PBX.
Situation
This example installation has the following considerations:
A-8
• Only one tenant (one MCO tenant group operation)
• 75 retail floor store phones
• restricted to local telephone use only except for 1800, 1888 and calls to a city where a sister
store and many suppliers are located
• restrict special calling numbers (976, 1900, outside operator, etc.)
• public emergency numbers always allowed
• 40 general office phones
• long distance allowed during day mode
• restrict special calling numbers (976, 1900, outside operator, etc.)
• public emergency numbers always allowed
• 10 purchaser/buyer telephones
• no time restriction
• restrict special calling numbers (976, 1900, outside operator, etc.)
• public emergency numbers always allowed
• 25 executive office telephones
• no time restriction
• no calling restrictions
• 2 attendant group phones
• no restrictions during the day
• local calls only at night to prevent abuse
• 7 warehouse phones
• extension and public emergency numbers only
• Trunks 1-24 are in Trunk Group 1 and are to the local CO (exchange line) for local calls. In addition,
long distance carriers are accessed using these trunks.
DBS 576 (USA) issued April 2002
Section 700 - Operation
576-51-700