Set Send Text Messages - Panasonic DBS 576 Technical Manual

Section 700 - Operation
Related Programming
• N/A
Considerations
• N/A

Set Send Text Messages

Description
You can send a text message to a key telephone with a display when you are sending call waiting
signal (Auto camp-on or manual camp-on). This menu item specifies the text messages that may be
sent.
Operation
To set Send Text Messages using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 4-3.)
2. At the 81 level, enter 11.
3. Press the HOLD key.
4. Enter 0.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the Message number (0-9).
8. Press the HOLD key.
9. Enter the Text Message (up to 15 characters):
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
4-27.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 4-28.)
Note: Press the FLASH key to clear any existing data.
576-51-700
Action
DBS 576 (USA) issued April 2002
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8111-
Text Message displays
8111-0:
Send Message displays
Enter Msg # displays
A B C D E F X
displays (where X = Send Text Message
number)
4-31