Offhook Voice Announce - Panasonic DBS 576 Technical Manual

Section 700 - Operation
Operation
After receiving an offhook signal during a call:
1. Complete the first call and place the handset on hook.
2. After the telephone rings, go off hook.
OR
1. Press and release the hook quickly (hookflash).
2. Press and release the hook quickly to go back to the
original call.
NOTE: The steps outlined above can be performed only when the necessary settings have been
programmed into the system.
Hardware Requirements
• N/A
Related Programming
• FF3: CO Off-Hook Signal
• FF1-1: Off-Hook Signal Timer
Considerations
• The CO call type may be either multiple ring, or DID/DIL whose destination is set to Auto camp-
on (Call Waiting).
• Offhook signaling is not supported for an ISDN terminal.
• The System does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• Receiving telephone is a 3rd party voice mail.

Offhook Voice Announce

Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement.
576-51-700
Action
Action
DBS 576 (USA) issued April 2002
Chapter 7. SLT Features
Result
First call is terminated.
Incoming call is answered.
Result
First call is placed on hold; incoming call
connects.
First call connects again.
7-31