Non-Verified Account Codes - Panasonic DBS 576 Technical Manual
Supports version 5.1, section 700 feature operation
Hide thumbs
Also See for DBS 576:
- Technical manual (770 pages) ,
- User manual (102 pages) ,
- Quick reference (4 pages)
Table of Contents
Advertisement
Section 700 - Operation
Non-Verified Account Codes
Non-Verified Codes are not checked by the system for validity. Depending on the setting, the user can
enter anything from 1-4 digits or 1-10 digits. Individual phones can be programmed to accept forced
Account Codes (the user must enter a code for every call) or voluntary Account Codes (the user can
enter a code, but doesn't have to, for each call).
Non-Verified Account Codes can be assigned to incoming and/or outgoing calls. For incoming calls,
the user can enter the Code anytime during the call. For outgoing calls, the user either enters the Code
before accessing an outside line (for forced Codes), or anytime during the call (for voluntary Codes).
Verified Account Codes
Verified Account Codes entered by phone users must match a code that has been preprogrammed into
an Account Code Table. Depending on the setting, the user can enter anything from 1-4 digits or 1-10
digits. These codes can also be either forced or voluntary. You can program these codes with their
own Toll Restriction Service (TRS) Class assignment so that, when entered, they will override the
extension's TRS Class. Thus, Verified Account Code users can "float" from phone to phone, placing
calls that would normally be restricted on that phone.
Non-Verified Account Codes
Non-verified Account codes are voluntary codes. (i.e., You do not have to enter an account code
before making a call.)
You can assign Non-verified Account codes to both incoming and outgoing calls. To assign an
account code to an outgoing call, you enter the account code before making the call or during the call.
To assign an account code to an incoming call, you enter the account code during the call.
Operation
To enter an account code before making a call:
1. Lift the handset or press the ON/OFF key.
2. Enter the Account Code feature code (default = 8#).
3. Enter the Account Code (up to 10 digits).
4. Press the # key.
5. Press a vacant CO key or enter a trunk access code.
6. Dial the phone number.
576-51-700
Action
DBS 576 (USA) issued April 2002
Chapter 5. Key Telephone Features
Result
Intercom dial tone
Enter Account # displays
Specified account code displays
Specified account code # displays
CO Key LED lights
Dialed phone number displays
5-7
Advertisement
Table of Contents
