Camp-On (Call Waiting) - Panasonic DBS 576 Technical Manual

Section 700 - Operation
221 is forwarded to extension 225, calls that are transferred to extension 221 will be forwarded to
extension 225.
• Calls can be transferred from paging using supervised transfer.
• If a call is unsupervised transferred to a busy extension, the call will camp on to the busy
extension.
• To transfer to a outside party, it is best to use supervised transfer. If the trunk-to-trunk on-hook
transfer restriction is enabled, a blind transfer will result in the loss of the second call but the
second call will be kept on hold. If not enabled and the second outside party is busy, the
transferred party will receive busy.

Camp-On (Call Waiting)

Description
If you dial a busy extension, you can camp onto that extension and send a Call Waiting signal to the
called party. The called party then needs only to replace the handset and pick it up again to be
automatically connected to the new call. The called party can also press the HOLD key to place the
first call on hold and then answer the waiting call.
The System provides two types of call waiting:
• Automatic Call Waiting: You do not need to enter a code to send the Call Waiting signal to
the busy extension. You need only to remain on the line.
• Manual Call Waiting: You must enter a code to send a Call Waiting signal to the busy
extension.
Operation
To set Automatic Camp-on:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Remain on the line until the called party answers.
To set Manual Camp-on:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. Enter the Camp-on (Call Waiting) code (default = 2).
4. Remain on the line until the called party answers.
576-51-700
Action
Action
DBS 576 (USA) issued April 2002
Chapter 6. DSLT Features
Result
Intercom dial tone
• Called party hears alert tone
• Calling party hears ringback tone
Result
Intercom dial tone
Busy tone
• Called party hears alert tone
• Calling party hears ringback tone
6-27