Trunk Access - Panasonic DBS 576 Technical Manual

Supports version 5.1, section 700 feature operation
Hide thumbs Also See for DBS 576:
Table of Contents

Advertisement

Section 700 - Operation
Operation
To set the Timed Reminder Call feature:
1. Lift the handset.
2. Enter the Timed Reminder Set code (default = *31).
3. Enter the time you want the Timed Reminder Call to sound.
(Enter the time in 24-hour format. For example, 0100 for 1
AM, 1300 for 1 PM).
4. Replace the handset.
To cancel the Timed Reminder Call feature:
1. Lift the handset.
2. Enter the Timed Reminder Cancel code (default = *39).
3. Replace the handset.
Hardware Requirements
N/A
Related Programming
N/A
Considerations
An alarm tone (default = 60 seconds) will be issued at the specified time.
An extension can have only one Reminder Call set at a time.
To change the Reminder Call, simply enter a new time.
If the extension is in use when the reminder call is scheduled, the reminder call is issued 3
minutes later.

Trunk Access

Description
The System supports the following ways to seize an idle trunk to make an outside call:
Direct Trunk Access
MCO Trunk Access
576-51-700
Action
Action
DBS 576 (USA) issued April 2002
Chapter 7. SLT Features
Result
Intercom dial tone
Result
Intercom dial tone
7-41

Advertisement

Table of Contents
loading

Table of Contents