Table of Contents
Advertisement
DATALOGIC
BC-80X0 CONFIGURATION
The BC-80X0 configuration can be performed in three ways: by using the
Datalogic Aladdin™ software configuration program, by sending configuration
strings from the Host PC via the RS-232 or USB-COM interface or by reading
configuration barcodes with the Powerscan™ M reader.
DATALOGIC ALADDIN™
Datalogic Aladdin™ is a multi-platform utility program providing a quick and
user-friendly configuration method via the RS-232/USB-COM interface.
It also allows upgrading the software of the connected device (see the Datalogic
Aladdin™ Help On-Line for more details).
SERIAL CONFIGURATION
By connecting the BC-80X0 to a PC through an RS-232 or USB-COM interface
cable it is possible to send configuration strings from the PC to BC-80X0.
CONFIGURATION BARCODES
Once you have performed system connection and Powerscan™ M reader
configuration, you can configure the BC-80X0 cradle by reading configuration
barcodes. Apply power to the BC-80X0.
For Powerscan™ M configuration, refer to the "Powerscan™ M8300 Quick
Reference".
To configure the BC-80X0 using the Powerscan™ M reader (the one paired to the
cradle with the Bind command), follow the procedure according to the interface
selected.
RESTORE DEFAULT
RESTORE BC-80X0 DEFAULT
Ì$+RX0$-qÎ
To change the defaults refer to the "Powerscan™ D8330/M8300 Reference
Manual", or to the Datalogic Aladdin™ Configuration program, both
downloadable from the website.
10
Hide quick links:
Advertisement
Table of Contents
