Specifying The Settings; Specifying Settings Concerning The Use Of The Button For Deleting, The Display; (Mode 478); Factory Settings - Konica Minolta bizhub C200 Network Administration Manual

Specifying machine functions (software switch settings)
3.5.30

Specifying settings concerning the use of the button for deleting, the display

when a one-touch dial button is touched, and the default communication mode

(mode 478)

Specify settings concerning the use of the button for deleting, the display when a one-touch dial button is
touched, and the default communication mode.

Factory settings

Factory settings
Bits
Setting

Specifying the settings

During the production of this unit, the settings in the shaded cells were selected.
Bits Description
7 Specify the operation performed when the button for delet-
ing is touched.
6 Specify whether the recipient information or the name of the
one-touch dial button is displayed when a one-touch dial
button is touched.
5-2 Specify the default communication mode.
1-0 -
Note
The default settings for bit 7 are set to "0".
bizhub C200
7654 3210
0000 0010 (HEX: 02)
Settings Details
0 The character above the
cursor is deleted. If there is
no character above the cur-
sor, move the cursor with
the arrow keys, and then de-
lete a character.
1 If there is a character above
the cursor, it is deleted. If
there is no character above
the cursor, the character to
the left of the cursor is delet-
ed.
0 Recipient information (tele-
phone number, e-mail ad-
dress, etc.)
1 Name of the one-touch dial
button
0000 G3-1
0001 G3-2
0010 Internet fax
0011 IP address fax
0100 IP relay
0110 Scan to E-Mail
Others Do not specify any settings
other than those mentioned
above.
10 *Do not change the settings
for these bits.
3
3-37