Installing The Switch; Installing The Aileron - Flap Servos - Seagull Models Silence Twister Assembly Manual

Rudder servo arm.
Throttle servo arm.

INSTALLING THE SWITCH.

Install the switch into the precut hole in the
side, in the fuselage.
Trim and cut.
www.seagullmodels.com
Elevator servo arm.
3/ 32" Hole.
Switch.
Trim and cut.
Switch.

INSTALLING THE AILERON - FLAP SERVOS.

Servos.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of
the mount allow the servo lead to pass through.
1) Using a small weight (
) and string, feed the string through
works well
the wing as indicated.
Small weight.
Small weight.
Thread.
Weighted fuel pick-up
String.
11