Aileron Servo Installation; Installing The Switch - Seagull Models KA8-B Assembly Manual

Rudder servo arm.
Elevator servo arm.

INSTALLING THE SWITCH.

Install the switch into the precut hole in the
side of fuselage.
Trim and cut.
Switch.
Throttle servo arm.
Instruction Manual.

AILERON SERVO INSTALLATION.

Servos.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of
the mount allow the servo lead to pass through.
2) Using a small weight (
) and string, feed the string through
works well
the wing as indicated.
Small weight.
Weighted fuel pick-up
String.
7