Additional Items Required - Seagull Models Silence Twister Assembly Manual

KIT CONTENTS.
1 Fuselage
2 Canopy
3 Left wing panel
4 Right wing panel
5 Tail set
6 Aluminum wing tube
7 Scale pilot
8 Fiberglass cowl
9 Main landing gear
10 EP conversion pack
11 Hardware bag included

ADDITIONAL ITEMS REQUIRED.

0.75-0.91
0.91-1.25
Computer radio with 5 servos.
Glow plug to suit engine.
Propeller to suit engine.
Protective foam rubber for radio
system.
Silicone fuel line.
TOOLS & SUPPLIES NEEDED.
Thick cyanoacrylate glue.
30 minute epoxy.
5 minute epoxy.
Hand or electric drill.
Assorted drill bits.
Modelling knife.
Straight edge ruler.
2mm ball driver.
Phillips head screwdriver.
220 grit sandpaper.
90° square or builder's triangle.
Wire cutters.
Masking tape & T-pins.
Thread-lock.
Paper towels.
www.seagullmodels.com
INSTALLING LED LIGHTING SYSTEM.
2-stroke.
4-stroke.
4.8v led lights.
C/A glue.
HINGING THE FLAP.
Hinge.
T-pin.
3