Seagull Models Silence Twister Assembly Manual page 26

SILENCE TWISTER
ELEVATOR PUSHROD HORN
INSTALLATION.
1) Install the elevator control horn using
the same method as with the aileron control
horns.
2) Position the elevator control horn on
the both side of elevator.
Rudder control horn.
Elevator control horn.
Elevator control horn.
Rudder control horn.
3) Thread one clevis and M2 lock nut on
to each elevator control rod. Thread the horns
on until they are flush with the ends of the con-
trol rods.
4) Elevator and rudder pushrods assembly
as pictures below.
26
. Instruction Manual.
495mm.
Cut.
Elevator pushrod.
Control horn.
Metal clevis.
M2 lock nut.
Elevator pushrod.