Elevator control horn.
INSTALL RUDDER CONTROL HORN.
Epoxy.
Rudder control horn.
www.seagullmodels.com
2) Use four M4x30mm head bolts and four
4mm washers to attach the engine mount rails
to the firewall. Tighten the screws . Make sure
to use threadlock on the screws to help
prevent them from vibrating loose.
+ 0.75 - 0.91:
ENGINE MOUNT INSTALLATION.
1) Locate the items necessary to install the
engine mount included with your model. .
M4x30mm.
5.5mm.
5.5mm.
2 STROKE.
7