Seagull Models Silence Twister Assembly Manual page 24

SILENCE TWISTER
2) Make a 90-degree bend at the mark and cut
off the excess wire leaving 8mm past the bend.
M2 lock nut.
8mm
Servo arm.
Snap keeper.
Wing
.
Aileron
.
INSTALLING THE FLAP PUSHROD.
Repeat the procedure for the aileron pushrod.
Wing.
M2 lock nut.
24
.
Metal clevis.
Snap keeper.
Wing
.
Repeat the procedure for the other aileron servo.
Flap.
Instruction Manual.
3) Connect the linkage as shown and secure
the control wire with a snap keeper.
Wing. M2 lock nut.
Aileron
MOUNTING THE TAIL WHEEL.
Locate items necessary to install tail
wheel.
Aileron.
.