Installing The Fuselage Servos - Seagull Models Silence Twister Assembly Manual

SILENCE TWISTER
Fuel tank.
Tie wrap.
C/A glue.
Fuel pick up tube.
Blow through one of the lines to en-
sure the fuel lines have not become kinked
inside the fuel tank compartment. Air
should flow through easily.

INSTALLING THE FUSELAGE SERVOS.

Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of the
mount allow the servo lead to pass through.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the servo
into the aileron servo mount.
2) Secure the servos with the screws pro-
vided with your radio system.
10
.
Fuel tank.
A
Vent tube.
Fuel fill tube.
Instruction Manual.
Throttle servo.
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm as same as picture below:
Loctite secure.
1 PCS.
Throttle servo arm.
SERVO ARM GEAR INSTALLATION.
Servo arm.
Rudder servo.
Elevator servo.
Adjustable Servo
connector.
Servo arm.
Rudder servo arm.
Elevator servo arm.
Metal connector.