Pyronix Matrix 424 User Manual page 41

Partition Allocation
The following table shows partition assignment:
Option
1 Code not assigned to Partition 1
2 Code not assigned to Partition 2
3 Code not assigned to Partition 3
4 Code not assigned to Partition 4
Use the keys to select the partition required.
To enable access to this partition press the
To disable access to this partition press the
Repeat steps 1 to 3 until desired partition access has been enabled.
Press to store the changes.
Note: Users can only be assigned the same or fewer partitions which the Master user has
access to.
If a code already exists in one of the assigned partitions, a new user code must be chosen. The procedure will
automatically restart from the beginning, and all changes will be lost.
After allocating partitions the user Attributes must be assigned.
User Attributes
The following table shows user attributes:
Option
1 Omit Zones Not Allowed
2 Normal User Code
3 Duress Disabled On User Code
4 Arm Disallowed
5 Disarm Allowed
6 Forced Re-arm Disabled
7 Spare
8 Limited User Code
RINS915-2
OFF
Alarm LED OFF
ON
Code assigned to Partition 1
Code assigned to Partition 2
Code assigned to Partition 3
Code assigned to Partition 4
key until ON is displayed.
key until OFF is displayed.
Alarm LED ON
Omit Zones Allowed
Duress Only Code
Duress Enabled On User Code
Arm Allowed
Disarm Allowed
Forced Re-arm Enabled
Spare
Master User Code
Matrix User Guide
Factory Default
On
On
On
On
Factory Default
ON
OFF
ON
ON
ON
OFF
OFF
1 = ON
2-32 = OFF
Page: 37