Changing /Deleting User Codes And Attributes - Icon Keypad; Changing/Deleting A Code; Add/Delete/Change Users - Pyronix Matrix 424 User Manual

5 . 1 1 C h a n g i n g / D e l e t i n g U s e r C o d e s a n d A t t r i b u t e s – I c o n K e y p a d

5.11.1 Changing/Deleting a Code

Enter TV
Select a User Number
Two flashing underscores will be displayed prompting you to enter a user number. Up to 32 user codes can be
used.
You may either enter a two-digit user number OR use the > and ? keys to view user numbers that are
allocated to your partition.
Press the key to select that user number.
Note: Pressing the
mode.
Enter a New User Code
If the user number is valid you will hear a confirmation tone. Otherwise a low error tone will sound and you will
need to select another user number.
Enter a user code. This can be 4, 5 or 6 digits in length. If you are entering less than 6 digits then press the
key to accept the code.
Enter the user code again to confirm it. If you are entering less than 6 digits then press the
code.
Once complete you will hear an acceptance tone.

5.11.2 Add/Delete/Change Users

This function allows you to add new users to the system or to change existing users attributes.
This function has five stages that must be completed for the function to complete. These are:
1. Select a user number.
2. Enter a user code.
3. Select partition allocation.
4. Choose user attributes.
5. Assign maximum code uses.
Enter TW
Select a User Number
Two flashing underscores will be displayed prompting you to enter a user number. Up to 32 user codes can be
used.
You may either enter a two-digit user number OR use the > and ? keys to view user numbers that are
allocated to your partition.
Note: Pressing the
mode.
Enter a User Code
If the user number is valid you will hear a confirmation tone. Otherwise a low error tone will sound and you will
need to select another user number.
Enter a user code. This can be 4, 5 or 6 digits in length. If you are entering less than 6 digits then press the
key to accept the code.
Enter the user code again to confirm it. If you are entering less than 6 digits then press the
code.
Once complete you will hear an acceptance tone.
RINS915-2
key at this point will delete the user code and return you to user
>
key at this point will delete the user code and return you to user
>
Matrix User Guide
key to accept the
key to accept the
Page: 33