Lcd Keypad Log Table - Pyronix Matrix 424 User Manual

Matrix User Guide
Keypress
1st 2nd
A
g
g
g
g
A
ge
1 -
9 . 2 L C D K e y p a d L o g T a b l e
Each entry in the user log is stamped with the time and date. Use the
wish to view. In some cases, pressing the
This table can be used to decrypt the log messages on the LCD keypad into meaningful information.
Main Entry Additional Information
Entry Exit
Personal Attack Zone number
Fire Alarm Zone number
Alarm Zone number
Zone Tamper Zone number
Medical Alarm Zone number
Tamper 01
Tamper 02
Tamper 04
Tamper 06
Tamper 08
Tamper 09
Line Fail Alarm
Omit Zone 01-32
Device type
Device Tamper
01-99
PA Restore Zone number
Zone Restore Zone number
Fire Restore Zone number
GT Restore Zone number
Medical Restore Zone number
Key Box Open Zone name
Key Box Close Zone name
System Faults
Bell fuse fail (restore)
Aux fuse fail (restore)
Battery missing (restore)
Battery Low (restore)
Mains fail (restore)
Telephone fail (restore)
Device fail (restore)
Fail to report (restore)
Zone Bat Fault (restore)
Page 54
Icon
Battery fault on keyfob(s)
Jamming fault detected on wireless expander
Detector signal low
Detector signal has gone missing
Restore of the system fault
key will show you additional information.
Entry / Exit timer expired
PA zone activated, number signifies zone (00 = keypad)
FIRE zone activated, number signifies zone (00 = keypad)
Zone name Burglary on zone, number signifies zone
Zone name Tamper on zone, number signifies zone
Medical alarm, number signifies zone (00 = keypad)
Global tamper loop broken
Bell tamper loop broken
Plug on zone expander board not present
Remote device missing caused tamper
Keypress tamper
Remote device tamper
Telephone line fail alarm
Zone name Zone omitted, number signifies zone
Device type Remote device Auxiliary tamper
User name Personal Attack restore
User name Zone restore
User name Fire restore
User name Global tamper restore
User name Medical restore
Zone number A Key Box zone was opened
Zone number A Key Box zone was closed
Bell fuse fail (restore)
Auxiliary fuse fail (restore)
Battery missing (restore)
Battery low voltage (restore)
Mains fail (restore)
Telephone line fail (restore)
Remote device has gone missing/ been found on bus
(restore)
Failed to report to central station (restore)
Zone number Battery fault on one of the wireless detectors (restore)
Description
and keys to scroll to the entry you
Description
RINS915-2