Pyronix Matrix 424 User Manual page 15

Multiple Partition Indications
The following displays are shown when the keypad is used to arm or disarm the panel when configured as a
multi-partition system.
Please note that if you have a multi-partition installation, your keypad and user code may have been configured
for single partition operation only. If this is the case then please refer to single partition operation throughout this
manual.
Icon Keypad
Disarmed
Choose Partitions
Arming
P1 P2 P3
Armed
P1 P2 P3
Anti-Code Reset / Engineer Reset
(( ))
P1
RINS915-2
The DISARMED and
OK icons are displayed.
The panel is ready for
arming.
OK icon flashes to
prompt you to enter the
partition(s) you want to
arm.
OK stops flashing.
Arming partitions 1, 2 &
3 flash.
The ARMED icon is
displayed.
Partitions 1, 2, & 3 are
armed.
(( ))
In Alarm
Choose FTA
First To Alarm (FTA)
( ( ) )
Partition segments flash
alternately as shown.
Matrix User Guide
The last open zone
number is displayed.
(Zone 1)
The OK icon flashes.
Partition in alarm
flashes.
The BELL icon
flashes.
The first zone into
alarm in the partition
is displayed
Page: 11