Adjusting The Proximity Volume - Pyronix Matrix 424 User Manual

5 . 1 4 A d j u s t i n g t h e P r o x i m i t y V o l u m e
The following procedure should be followed to adjust the volume of a proximity card reader connected to your
system
Icon Keypad
Enter Y
Enter the proximity reader number (
choose which proximity reader to adjust.
If the proximity reader is not available to you then you
will hear an error tone.
Use the > and ? keys to adjust the volume
The proximity reader will emit a sound to help you
adjust the volume.
Press the key to accept the new setting.
RINS915-2
Use the
VOL". The following display will be shown:
- V), to
Press
The following display will be shown:
Enter a number 1 to 4 for the number of the proximity
reader to be adjusted.
If the reader cannot be found an error tone sounds
and you will be returned to the main menu.
The following display will be shown:
Use the
decrease the volume respectively.
The following display will now be shown indicating the
volume level:
Press
An acceptance tone will be heard and you will be
returned to the main menu.
LED Keypad
and keys to navigate to "PROXIMITY
to select this option.
key or the G key to increase and
to store the new volume setting.
Matrix User Guide
Page: 41