Matrix User Guide
3 . 1 0 D i s p l a y i n g S y s t e m F a u l t s
3.10.1 Icon Keypad
When the Matrix detects a system fault, it displays the fault on the icon keypad (
a special symbol and a number. You can use this number to look up the actual fault by using the log table on
page 52. The system fault section of the log table has been repeated here for your convenience.
Example: System Fault 7
System Fault symbol
When a system fault is displayed in day mode, the following table applies.
System Fault
While system faults are being displayed the keypad sounder periodically emits a low tone. This is to alert you to
the fault. Once you are aware of the fault you can silence the low tones by pressing the
fault is being displayed. If the fault is not cleared for a period of time then the sounder will re-start.
In hidden display mode the fault sounder cannot be silenced.
3.10.2 LCD Keypad
On an LCD keypad the system fault is automatically displayed on the display as shown below:
While system faults are being displayed the keypad sounder periodically emits a low tone. This is to alert you to
the fault. Once you are aware of the fault you can silence the low tones by pressing the
fault is being displayed. If the fault is not cleared for a period of time then the sounder will re-start.
In hidden display mode the fault sounder cannot be silenced.
Note: If the keypad has entered hidden display mode, only the time and date will be
displayed.
Page 12
Description
1
Bell fuse fail
2
Auxiliary fuse fail
3
Battery missing
4
Battery low voltage
5
Mains fail
6
Telephone line fail
7
Remote device has gone missing
8
Failed to report to central station
9
Battery fault on wireless expander
A
Battery fault on keyfob(s)
B
Jamming fault on wireless expander
C
Detector signal low
D
Detector signal has gone missing
TIME/DATE
!BATTERY MISSING
â
). The fault takes the form of
Fault number
Fault icon
Icon
â
â
â
â
â
â
â
â
â
â
â
â
â
key once while the
key once while the
RINS915-2
Need help?
Do you have a question about the Matrix 424 and is the answer not in the manual?