Partition Indications; Lcd Keypad - Multiple Partitions - Pyronix Matrix 424 User Manual

3 . 9 P a r t i t i o n I n d i c a t i o n s
If your alarm panel has been configured at install time to have more than one partition, you may display single
or multiple partition information, depending on a variety of options programmed by your installer. If your keypad
has been configured for a single partition use only, then you will not display partition information, except in anti
code reset.
3.9.1 LCD Keypad – Multiple Partitions
The following status will be displayed for each partition of a common keypad, assuming hidden display mode is
not active:
I
All partitions are disarmed
Partition 1 is armed
Partition 1 Engineer / Anti-code reset required
RINS915-2
Alarm % Arming
& Armed # Reset Required
! Arming With Omits
Partition 1 is arming or selected to be armed
Partition 1 in alarm condition
Partition 1 arming with omits
Matrix User Guide
Page: 9